Names And Functions Of Parts; Front Panel - Tascam VS-R264 Reference Manual

2 - Names and Functions of Parts

Front panel

VS-R264
1 POWER indicator
This shows whether the power is on or off.
Status
Power is off Unlit
Power is on Lit blue
NOTE
If a switching hub that supports PoE power supply rather
than PoE Plus is connected, the OVERLOAD, INPUT, STREAM
and RECORD indicators will light.
2 OVERLOAD indicator
These light when signals reach 3 dB below the maximum
input level.
3 INPUT indicator
This shows the status of signal input from an HDMI source
device.
Status Meaning
Lit blue Ordinary operation
Blinking red Invalid signal
4 SD card slot
Insert SD card in this slot. (see "Inserting and removing SD
card" on page 8)
5 STREAM button and indicator
Press this button to turn RTMP streaming on and off. (see
"RTMP page" on page 14)
This indicator shows the streaming status of this unit.
Status Meaning
The encoding/decoding functions are
Unlit
disabled (off ).
The encoding/decoding functions are
Blinking red enabled, but they have no streaming
data.
Lit blue Streaming is occurring normally.
4
TASCAM VS-R264 / VS-R265
Meaning
Ordinary operation
VS-R265
6 RECORD button and indicator
Press this button to start recording to external storage if it is
available. (see "File recording page" on page 16)
Press this button during recording to stop recording.
This indicator shows the status of recording to external
storage.
Status Meaning
Unlit Recording is stopped.
The recording medium is full or
unavailable.
Blinking red
Or, there is no input from an HDMI
source device.
Lit red Recording is in progress.