Table of Contents
Advertisement
4 - Using Streaming Dashboard
6 Audio Settings
Click the
button to open the encoder Audio Settings
screen. (see "Encoder Audio Settings screen settings" on page
12)
7 Encoder Settings
Click the
button to open the Encoder Settings screen.
(see "Encoder Settings screen settings" on page 12)
8 Output Settings
Click the
button to open the Output Settings screen.
(see "Output Settings screen settings" on page 14)
Encoder Audio Settings screen settings
Make audio input settings on this screen.
Audio Input Type
Use this to select the appropriate video input type.
Click this to open an option list.
Option
HDMI-Embedded Audio
(default)
Balanced Audio
Unbalanced Audio
Balanced Reference Level
Set the reference level of the balanced input.
Click this to open a setting value list.
Settings: -16 dBFS (default), -14 dBFS, -9 dBFS
After completing settings on this screen, click one of the buttons
below to save the settings.
o Click the
button to save the settings and close the
settings screen.
o Click the
button to save the settings.
NOTE
Click the
button to close the settings screen without
saving the settings.
12
TASCAM VS-R264 / VS-R265
Meaning
Select audio embedded in an
HDMI signal.
Select the analog balanced
input.
Select the analog unbalanced
input.
Encoder Settings screen settings
Use this screen to set the encoder functions of the unit.
1 Video Input Resolution
This shows the resolution and frame rate of the video source
connected to the HDMI IN connector.
The following resolutions can be input through the HDMI IN
connector of the unit.
2160p30/p29.97/p25/p24/p23.98 (VS-R265 only)
1080p60/p59.94/p50/p30/p29.97/p25/p24/p23.98,
720p60/p59.94/p50, 576p50, 480p60, 480p59.94
2 Video Scaling
This sets the encoded scaling resolution.
Click this to open a setting value list.
Settings: Passthrough, 320x180p, 480x270p, 640x360p,
720x480p, 720x576p, 960x540p, 1280x720p,
1920x1080p, 3840x2160p (VS-R265 only)
NOTE
When "Passthrough" is selected, the same resolution as input
is output.
3 Limit to 30 FPS
When this switch is set to "ON", the frame rate per second will
be reduced by half when the input exceeds 30 FPS (default:
OFF).
This enables limiting the streaming bit rate.
4 Encoding Mode
This set the video codec encoding mode.
Click this to open an option list.
Option
Constant Bitrate
Variable Bitrate (default)
Meaning
Fixed bit rate
Variable bit rate
Advertisement
Table of Contents
