Hardware Reset Function - Tascam VS-R264 Reference Manual

Conduct a hardware reset to reset all the network settings on the Device Settings screen and all the settings shown in Streaming
Dashboard, including device names.
1.
Turn the device off.
2. Press and hold the STREAM button.
3. Turn the device on while continuing to press the STREAM button.
4.
Keep pressing the STREAM button for at least 30 seconds while the power is on.
When resetting completes, all indicators except the POWER indicator will blink five times.
5.
After a hardware reset of a device completes, the following values will be set to their defaults.
Default value table
Settings screen
Audio Settings screen
Encoder Settings screen
RTMP page
Encoders screen
HLS page
Multicast page
Unicast pages
RTSP page
File recording page
FTP Upload page
Audio Settings screen
Decoders screen
Decoder Stream Settings
screen
General page
Device Settings screen
Network page

5 - Hardware Reset Function

Setting item
Audio Input Type
Video Input Resolution
Video Scaling
Limit to 30 FPS
Encoding Mode
Keyframe Interval
Quality/Latency
Video Encoding
Profile
Audio Encoding
RTMP Output
HLS Server
Number of Segments
Segment Length
Multicast Output
Unicast Output A
Unicast Output B
RTSP Server
Stream Name
Port
Record to USB
Filename
Upload Recorded Files
Delete file from storage after upload
Balanced Reference Level
Volume Output Level
Mute
Source Encoder
Name
Encoder
Device Roles
Decoder
Address Assignment
Default value
HDMI with Embedded Audio
Auto-Detected
Passthrough
OFF
Variable Bitrate
1 second
Normal
H.264 (AVC)
10000 kbps
High Profile
MPEG-4 AAC-LC
128 kbps
OFF
OFF
10
2 seconds
OFF
OFF
OFF
OFF
default
554
OFF
VID
OFF
OFF
-16 dBFS
0 dB
OFF
Other Encoder
[Model name]+[MAC address]
ON
ON
DHCP
23
TASCAM VS-R264 / VS-R265