Table of Contents
Advertisement
4 - Using Streaming Dashboard
4.
Click the "Open" button for the VS-R264/VS-R265 you want
to connect.
Select the VS-R264/VS-R265 that you want to set or check
and log in to it.
When connection between the VS-R264/VS-R265 and
the controlling computer is confirmed, the Streaming
Dashboard Encoder Control screen will open.
NOTE
Click the "Open" button in TASCAM DISCOVER for a VS-R264/
VS-R265 to make it the current device.
TIP
When using multiple VS-R264/VS-R265 units on the network,
we recommend connecting to each one individually using
Streaming Dashboard.
Identifying VS-R264/VS-R265 units can be made easier by
giving each its own name. (see "General page" on page 20)
If a unit cannot be found using TASCAM
DISCOVERY
If a unit cannot be found when using TASCAM DISCOVERY,
follow these procedures to connect it using Streaming
Dashboard.
Turn the unit on and get the IP address and other network
information for it.
1.
Connect a USB flash drive or SD card.
2.
Disconnect the USB flash drive or SD card after waiting
about 30 seconds.
A "streaming_network_configurations.txt" file will be
created on the USB flash drive or SD card.
This file includes the following information.
o IP address
o Subnet mask
o Gateway address
o Domain name server (DNS)
3.
Input the IP address shown in the text file into the web
browser, and connect it to Streaming Dashboard.
10
TASCAM VS-R264 / VS-R265
Screen overviews
When connected to Streaming Dashboard, the Encoder Control
screen will open.
Tab Area overview
Selection buttons for each page are shown at the top of the
screen.
The locations of the buttons depend on the size of the window
or tablet display.
1 Current device name
Shows the currently selected device.
2 IP address
This shows the IP address of the IP address item on the
Network page of the Device Settings screen. (see "Network
page" on page 21)
3 Page selection buttons
Click a page selection button to open that page.
The selection button for the open page appears lit.
Button
Meaning
Use to set and manage encoder
Encoder Control
functions.
Used to set and manage decoder
Decoder Control
functions.
This shows the status of the
Device Settings
connected VS-R264/VS-R265 and can
be used to make settings for it.
Use to restart a connected VS-R264/
Advanced
VS-R265 or update its firmware.
Advertisement
Table of Contents
