Table of Contents
Advertisement
Network page
Use the Network page to set network functions.
Address Assignment
Set the IP address setting mode.
Click the selected button to change the setting mode.
Option
Meaning
The IP Address, Subnet Mask, Gateway and DNS
Address items on the Network page will be set
DHCP
automatically.
(default)
Use this setting if there is a DHCP server on the
network.
Set the IP Address, Subnet Mask, Gateway and
Static
DNS Address items manually on the Network
page.
IP Address
This shows the current IP address set on the device.
Clicking the address area when the Address Assignment
item is set to "Static" will cause the cursor to blink and make
changing the address possible.
Subnet Mask
This shows the current subnet mask set on the device.
Clicking the address area when the Address Assignment
item is set to "Static" will cause the cursor to blink and make
changing the address possible.
Gateway
This shows the current gateway set on the device.
Clicking the address area when the Address Assignment
item is set to "Static" will cause the cursor to blink and make
changing the address possible.
DNS Address (Optional)
This shows the current DNS server address set on the device.
Clicking the address area when the Address Assignment
item is set to "Static" will cause the cursor to blink and make
changing the address possible.
NOTE
Clicking the
button when the Address Assignment item
is set to "Static" will cause the following pop-up message to
appear.
4 - Using Streaming Dashboard
NTP page
Make NTP server settings on the NTP page.
NTP SERVER
Edit the NTP server name.
The default name when shipped new from the factory is
"time.nist.gov".
TIME ZONE
Select the time zone appropriate for your use situation.
NOTE
Time zones that use daylight savings will be adjusted
automatically.
21
TASCAM VS-R264 / VS-R265
Advertisement
Table of Contents
