R_USB1(R_USB5)
23
24
25
26
27
28
29
30
J_PWRCOM4 (COM4 VCC Select Jumper 3*2 Pin 2.54mm)
CLR_CMOS1 (CMOS Clear Jumper 3*1 Pin 2.54mm)
Part II System Assembly and Disassembly
1. Main screen, Second screen (15.6"/10.1") and VFD.
Note: As the second screen (15.6"/10.1") and the fixed structure of the guest display and the base are
fixed with three gaskets and anti-loosening screw, the following is illustrated with the 15.6-inch screen
as an example.
1.1
Remove the rear housing of the base and unscrew the two screw shown here.
R_USB2
R_USB3
COM1
COM2
COM3
RJ45_1
PJ1
POWER USB 24V Key-2 Connector (USB2.0
TYPE-A Connector)
USB2.0 Dual TYPE-A Connector
USB3.0+USB2.0 TYPE-A Connector
COM1 RJ50 Connector
COM1 RJ50 Connector
COM1 RJ50 Connector
LAN RJ45 Connector
Line-out 3.5mm Jack
Figure 1
9