Parameter
Save Changes and
Reset
Discard Changes and
Reset
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Launch EFI Shell from
filesystem device
1. Switching Instruction
Start-up: When the adapter is connected, press the Power button on the right back side of
the bottom of the machine, see the button indicator light on, and hear a "beep" prompt
sound, then start-up can be achieved.
Shutdown: Select the shutdown item under the Windows system, and then shut down
automatically.
2. Instructions for using magnetic stripe cards
Description
Reset system setup after saving the changes.
Reset system setup without saving any changes.
Restore/Load Default Values for all the setup options.
Save the changes done so far as User Defaults
Restore the User Defaults to all the setup options
Attempts to Launch EFI Shell application (Shell.efi) from one of
the available filesystem devices
Part IV Instructions for Usage
28