Table of Contents
Advertisement
Figure 13
Part III System Installation
1. Inspection of installation environment
It is important to choose a safe and reliable place to install the terminal.
Choose a table or table large and strong enough to support the weight of the system and peripherals.
Choose a flat, hard surface. Carpet areas can generate static electricity to replace memory or damage
system components.
Make sure that the system is installed in a well ventilated area and that the space is free.
Choose appropriate environmental conditions, such as cool and dry places. Avoid damp and dusty places.
At the same time, avoid direct sunlight, rapid temperature change, or place the system near the heat
source.
Choose the appropriate voltage. Connect all devices to an isolated socket to prevent static electricity and
short circuit.
Make sure printers and other peripherals have enough power outlets.
Do not install near electromagnetic and electrical equipment, such as telephones and motors, which may
cause system damage.
The socket should be installed near the equipment and should be accessible.
2. System software installation
1. Mainboard Driver installation and Usage
Driver
Mainboard
14
Hide quick links:
Advertisement
Table of Contents
