Color Setup Options - Toshiba GA-1120 Configuration Manual

4
4-40 Performing Setup from the Control Panel
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in PS Setup; select No to return to the main
Setup menu without making any changes.

Color Setup options

Color Setup allows you to set defaults the GA-1120 uses to control color output.
Mac OS and Windows users who use the printer drivers provided on the User
Software CD can override most of these defaults on a job-by-job basis. However, users
printing from UNIX or DOS command lines cannot override defaults from their
applications. Therefore, you must set defaults in Color Setup.
The preferred method for setting color defaults is to use Color Setup, part of the
ColorWise Pro Tools. The color options are described in this section for your
reference. For more information about these defaults, see the
Guide.
In addition to the defaults described in this section, Mac OS and Windows users
N :
OTE
have additional settings available from the printer drivers.
T C S
O ACCESS OLOR ETUP OPTIONS
1. In the main Setup menu, choose Color Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you have finished, save changes.
In the list of options that follows, default values, where applicable, appear in square
brackets.
RGB Source Profile
EFIRGB/sRGB (PC)/Apple Standard/None [EFIRGB]
The RGB source is the color space used to control color for conversion from screen to
printed output. EFIRGB is based on the reference points used in the creation of the
GA-1120 software. sRGB is based on an average of a large number of PC monitors.
Apple Standard is the standard reference point for Apple's ColorSync software.
Printing Guide and Color