Toshiba GA-1120 Configuration Manual page 72

4
4-20 Performing Setup from the Control Panel
Select Frame Types
IPX Auto Frame Type
Yes/No [No]
Specify whether the GA-1120 should try to bind to all available frame types
automatically. The GA-1120 does so whether or not all frame types are appropriate.
To determine the frame types that were successfully bound, save your changes, exit
Setup, restart the GA-1120, and print a Configuration page. The Configuration page
lists only one of the frame types that were successfully bound.
If you answer No to this option, you can select frame types manually. You must choose
at least one frame type to enable IPX/SPX protocols.
The frame selection screen allows you to make multiple selections. Depending on your
Port Setup selection, only Ethernet frame types or all frame types are displayed.
Press theSet button for each frame type used on your IPX/SPX network. An asterisk
(*) appears beside each selected frame type. Press the line selection button again to
deselect a frame type. Use the Up and Down arrow buttons to scroll to additional
frame types. The GA-1120 binds to each frame type as you select it.
When you have selected all the frame types used, choose Exit IPX/SPX Setup.
Clear Frame Types
You can clear all frame types at once by choosing Exit IPX/SPX Setup, then choosing
IPX/SPX Setup and selecting Clear Frame Types.