Toshiba GA-1120 Configuration Manual page 150

A
A-2 Troubleshooting
After this Setup screen
Enable NDS
(Network Setup>Service
Setup>PServer Setup>NDS
Setup)
Select NDS Tree
(Network Setup>Service
Setup>PServer Setup>
NDS Setup)
Navigating NDS tree
(Network Setup>Service
Setup>PServer Setup>
NDS Setup)
Bindery Setup
(Network Setup>Service
Setup>PServer Setup>
Bindery Setup)
Select File Server From List
(Network Setup >Service
Setup>PServer Setup>
Bindery Setup)
This message
No NDS trees found.
Warning! Selecting a new
NDS tree deletes Bindery
setup.
___ is empty.
If you also plan to use NDS,
set up NDS before Bindery.
Error. Cannot open bindery
connection to NDS server.
No NetWare file
server found.
Means
No NDS trees were found on the Novell network. Check
to see that the frame types on the GA-1120 are properly
configured.
You have previously connected the GA-1120 to a different
NDS tree. NetWise supports only a single NDS tree
connection. To avoid a potential conflict with an existing
tree connection (for example, if the connection was made
through a NetWare 4.x server in emulation mode), all
bindery settings will be deleted.
If you choose OK, and choose Yes in the following message
(Delete Bindery setup and continue?), bindery settings are
deleted and have to be re-entered in Bindery Setup.
To avoid deleting the bindery settings, press the Menu key,
or select OK and choose No in the following message
(Delete Bindery setup and continue?).
Repeat NDS Setup without changing the NDS tree, or exit
to Bindery Setup to review your current bindery settings.
The chosen container contains no sub-containers or objects
relevant to the current mode of navigation.
No NDS settings are present. You are reminded to perform
NDS Setup before Bindery Setup in case your network
includes both NDS and bindery servers.
Select this server through NDS setup or disable NDS and
select it through bindery.
No file server was found when GA-1120 queried the
network to create a list of supported servers or a list of all
servers.
Check cable connections and make sure the NetWare
server is turned on.