Toshiba GA-1120 Configuration Manual page 102

5
5-4 Setting up the GA-1120 from a Windows Computer
Date and Time
Enable Printed Queue
location on the GA-1120 disk for recently printed jobs. You can reprint jobs from the
Printed queue without resending them to the GA-1120. If the Printed queue is not
enabled, jobs are deleted from the GA-1120 disk immediately after they are printed.
Jobs Saved in Printed Queue
Queue. Jobs in the Printed queue take up space on the GA-1120 hard disk.
—
Delete Scan Jobs
Choose Manually to delete scan jobs manually on a job-by-job basis. Click Delete Scan
Jobs Now to delete scan all jobs immediately.
Use Character Set
should use the Macintosh, DOS, or Windows character set for displaying file names.
This is important if a file name includes accented or composite characters (such as é
or æ). For mixed-platform networks, select the setting that gives the best overall
representation of the special characters you use.
Print Start Page
turned on or restarted. The Start Page displays information about the GA-1120,
including server name, current date and time, amount of memory installed, network
protocols enabled, and print connections published.
—Enter names, phone numbers, and e-mail addresses of contact people at
Support
your organization who provide support for the GA-1120 and the copier. In remote
Setup, use the Support tab.
—Specify the system date and time, which are recorded on the Job Log.
—Specify whether to enable the Printed Queue, a storage
—Specify the number of jobs to be stored in the Printed
Specify how often to delete scan jobs from the GA-1120 hard disk.
—Specify whether the Control Panel and the job management tools
—Specify whether the GA-1120 should print a start page when it is