Toshiba GA-1120 Configuration Manual page 35

2
2-13 GA-1120 on a NetWare 4.x or 5.x network
Setting up a NetWare print queue for bindery
For NetWare 3.x and for NetWare 4.x in emulation mode, the NetWare print server and
print queue for the GA-1120 are created and configured from NetWare Print Console
(PCONSOLE), a NetWare utility that is stored in the NetWare PUBLIC directory.
As with NDS, you can create several NetWare entities on a Novell server, and then you
can select them in Network Setup (see
Setting up NetWare Windows clients for printing
Before setting up client workstations for printing, perform Network Setup (see
page 4-12), and verify that the settings reflect the entities you created in the NetWare
administrator utilities (see
For printing to the GA-1120, connect all Windows clients to a NetWare server
N :
OTE
and permit them to connect to the Netware print server or servers on which you
defined a NetWare print queue for the GA-1120.
After the Novell server and the GA-1120 have been set up, client setup consists of:
• Installing the networking protocol, binding it to the network adapter card, and
permitting the client to log in to the NetWare file server.
On Windows 9x/Me workstations, load both the IPX/SPX-compatible protocol and
the Client for NetWare Networks from the Network Control Panel.
On Windows NT 4.0/2000/XP workstations, install Client Services for NetWare.
Use the CSNW option in the Control Panel to set printing options and specify a
preferred NetWare server.
• Setting up the GA-1120 as a PostScript printer by installing a PostScript printer
driver and the GA-1120 PPD (PostScript printer description).
• Adding a network port and connecting the workstation to one or more NetWare
queues that have been defined for the GA-1120.
• Installing GA-1120 software, such as color reference files.
For details, see the
page 4-21).
page 2-10).
User Software Installation Guide.