Selecting System Mode; Selecting Fan Speed (For 2 And 3 Fan Speeds Configuration) - Carrier ComfortVu Plus TBPL-H Installation And Operation Manual

In Two setpoints configuration:
1
Press the ▲or ▼buttons once. "CL" and the setpoint
temperature for cooling will appear on display.
2
Use the ▲or ▼buttons to adjust the setpoint for cooling.
3
Press the [Mode] button or wait 3 seconds. "Ht" and the
setpoint temperature for heating will appear on display.
4
Use the ▲or ▼buttons to adjust the setpoint for heating.
Notes:
•
The setpoint for cooling must be higher than the setpoint for
heating.
•
For humidity setpoint, see Technician Settings P197.

Selecting system mode

Press the [Mode] button to switch between system modes.
Notes:
•
During demand for cooling or heating, the active mode will
flash.
•
In Auto mode, the active mode icon (Cool or Heat) will flash.
•
Auto mode is not available in 2-Pipe system configuration.

Selecting fan speed (for 2 and 3 fan speeds configuration)

Press the [Fan] button to switch between fan speeds.
Notes:
•
In Auto speed, the active fan speed will appear on display.
•
Medium speed available in 3 speeds configuration.
ComfortVu™ BACnet Thermostat Plus Model TBPL-H (Line voltage)Carrier Proprietary and Confidential
Installation and Operation Guide
Setpoint for cooling
Cool mode
mode
Low speed Medium
speed
9
Setpoint for heating
Heat Auto Fan only
mode
High
speed
CARRIER CORPORATION ©2020
All rights reserved
Auto
speed