Do you have a question about the Comfort series and is the answer not in the manual?
Questions and answers
Karen Baldigo
April 3, 2025
Have Carrier Product 58MV
p040 - 14 repairman refuses to even service unit as he believes their is a high degree of Carbon Monoxide leaking into air. Unit was manufactured in 2004. He said the rusting in releasing the CO2 into air and the installed CO detectors are not designed to detect that level of leakages. I;ve lived with this unit since Oct, 2004. What gives??
Page 2
Take a few minutes to review the features and functions clean or replace your system's air filter, listed at the right. Carrier gives you control over your comfort with simple instructions, responsive push buttons Room Temperature and an easy-to-read backlit display.
Page 3
SETTING AND OPERATING THE THERMOSTAT .... Setting your indoor temperature set points ....Setting the fan operation ....... Setting the mode operation ......Checking the outdoor temperature ...... Service filter feature ........Balterychange out ........AUTO CHANGEOVER ........WHAT IF ..........
Page 4
Setting fan operation Setting your indoor temperature set points 1 Press the FAN button to switch between 1 Press the UP or DOWN button. ON and AUTO fan settings. The LCD readout will be illuminated and FAN on indicator will be displayed the heating or cooling temperatureset on LCD.
Page 5
desired temperature. AUTO mode may be Batte ry change out dscbled. If the installation requires the usage of batteries, the batteries will require replacement eve ry12 months. 1 Open door on thermostat. Checking the ou tdoor temperature Press the UP and DOWN buttons 2 Slidebattery compartment door to the right.
Page 6
Your thermostat provides complete, automatic The AUXILIARY HEAT indicator is displayed... control over heating and cooling with auto The AUX HEAT indi c_or appears on the heat pump changeover. Auto changeover means your system version of the thermostat only. It is displayed when will automatically heat or cool as needed...
Page 7
measure temperatures. You will need to contact your AuxiliaryHeat ......Pg. 7 dealer to repair the problem. Most heat pump systems require a supplemental An E2 reading on the LCD display means there is heating source, called auxili a ry heat, to maintain your not enough voltage for the system to operate.
Page 8
Mode ........Pg. 3 Set Poir_s ......... Pg. 2 Mode refers to the type of operation your system is The heatin 9 and coolin 9 temperature set points you wish the system to maintain and have entered into set up to perform. Mode settings include: OFF, HEAT, COOL and AUTO.
Need help?
Do you have a question about the Comfort series and is the answer not in the manual?
Questions and answers
Have Carrier Product 58MV p040 - 14 repairman refuses to even service unit as he believes their is a high degree of Carbon Monoxide leaking into air. Unit was manufactured in 2004. He said the rusting in releasing the CO2 into air and the installed CO detectors are not designed to detect that level of leakages. I;ve lived with this unit since Oct, 2004. What gives??