Faq - HDL SB-DN-512DMX User Manual

Changing Attribute.
CHANNEL SETUP
1 High Limit Level
2 Lower Limit Level
3 Output Limit Level
6.6 Patch Setup
In Patch Setup interface, you can modify the patch between DMX signal channel and
buspro channel.
PATCH SETUP
1 Patch About
2 Patch Modify
3 Patch Setup
6.6 Area Channel Config
In this interface, you can add/modify the area.
Area Channel Config
1 Area Channel About
2 Area Channel Config
3 Area Channel Backup

7. FAQ

7.1 FAQ001_ Buspro
Q:
We can set "running time" in the Scene setting, we set 3 seconds and turn it on by
pressing a user panel, and expecting it to turn off automatically 3 seconds later, but what
we saw was the load turned on slowly and reached the preset brightness 3 seconds later,
DMX Controller – User Manual
User Manual
SB-DN-512DMX
15