Table of Contents
Advertisement
Example:
If now in area we want to create a sequence which runs this way for ever: step1 (channel
1 on) -> step 2 (channel 2 on) -> step 3 (channel 3 on) -> step 4 (channel 1, 2, 3 off) ->
step1 -> step2 -> step 3....
a)
Select the "Area", here we select area 1;
b)
Click 'Add', add a sequence;
c)
Click 'Remark', we can name it "flowEffect-nonstop".
d)
Click 'Sequence', we need 4 scenes, one for each step, and we want it to run forever
once it is started (until end-user stop it manually), so we set it as below. There are
four modes – Forward mode, Backward mode, Forward and Backward mode,
Random mode. The sequence effect described above is a forward mode effect.
e)
Click 'Step', according to the effects, the 4 scenes we need for each step are scene1-
'ch1 on', scene2-'ch2 on', scene3-'ch3 on', scene0-'all off'. 'Step time' means how
much time later the sequence will jump to another step (scene), typically we set it
larger than the running time of the scene, here we set 2s.
DMX Controller – User Manual
User Manual
SB-DN-512DMX
12
Advertisement
Table of Contents
