Table of Contents
Advertisement
5.2 Area Setup
Below screen shot shows all 512 channels of SB-DN-512DMX are not assigned to any
area, actually there is no area yet.
Suppose according to the wiring, channel1 to 16 are used to control 16 LEDs in area1,
channel 17 to 50 are used to control 33 LEDs in area2. The configuration steps would be
like this:
a)
Click "Create area", area 1 is created, we can find and select it in "Select area".
b)
Select channel 1 to 16 and move them from left block to the right block, click "save".
c)
Click "Create area", area 2 is created, we can find and select it in "Select area".
d)
Select channel 17 to 50 and move them from left block to right block, click "save".
e)
Exit this "Area setup" window, we can name the two areas, i.e., area1 and area2.
DMX Controller – User Manual
User Manual
SB-DN-512DMX
7
Advertisement
Table of Contents
