HDL SB-DN-512DMX User Manual page 20

User Manual
SB-DN-512DMX
Yes, e.g., if you set Lower limit=30%, Higher limit=80% and Max level=90%, and then you
use a user panel to command the dimmer channel to go to 40%, the Dimmer will find the
value 40% is in the range 30% ~80%, and so the channel output will be 40%, but if you
command the dimmer channel to go to 20%, the Dimmer will find the 20% is lower than
the Lower limit (30%) and the channel output will be 0%, if you command 85%, the
Dimmer will find 85% is higher than the Higher level(80%), and the channel output will be
the Max level(90%).
The Lower limit is useful if you unfortunately have some lamps which produce unstable
(trembling) light when dimming in low segment. You can bypass the unstable segment by
setting a suitable Lower limit.
DMX Controller – User Manual
17