HDL SB-DN-512DMX User Manual page 17

In SYSTEM SETUP interface, it has 7 items:
 1 D-Bus ID Set: shows the ID of this device, and can be modified here.
 2 Ethernet Set: shows the IP information (IP, Router IP, Server Port, MAC Address),
and can be modified here. The Server Port must be set as 6000, so as to be searched
in buspro software.
 3 LCD Backlight: able to set the brightness of LCD backlight.
 4 Language Select: able to set the language (Chinese or English).
 5 Net DMX Set: able to set the Net DMX signal (HDL-Net or Art-Net).
DMX channel: the start channel of NET DMX signal. The range of HDL-Net is
001~255; the range of Art-Net is 000~255.
DMX port: the port for HDL-Net / Art-Net; if use Art-Net, this port will be fixed as 6454,
no need to change.
 6 Modify Password: able to modify the password. The default password is 4573.
 7 Initial System: initial the SB-DN-512DMX.
6.3 Scene Setup
In Scene Setup interface, you can modify the Scene Time.
SCENE SETUP
1 Scene About
2 Scene Setup
3 Scene Show
6.4 Sequence Setup
In Sequence Setup interface, you can modify the sequence's information.
SEQUENCE SETUP
Area:01 Remain SEQ 89
SEQ: 01 02 03 04 05
○
i
State: √
√ √ √
6.5 Channel Setup
In Channel Setup interface, you can modify the Lower limit, Higher limit, Max level and
DMX Controller – User Manual
User Manual
SB-DN-512DMX
14