Table of Contents
Advertisement
User Manual
SB-DN-512DMX
5.3.5 Modify patch
Modify the patch between DMX signal channel and buspro channel.
In above screen shot, when you control the channel 2 of SB-DN-DMX512, you can control
Dimmer (e.g. LED strip) channel 1 and channel 2 together,
5.4 Scene Setup
This Dimmer supports 513 scenes for each area. Scene 0 is reserved by the dimmer,
cannot be edited the intensity, it is reserved for all off, the "Running time" is editable.
"Running time" is explained in "FAQ001_ Buspro" below in this doc.
Select the "Area", here we select area 1, suppose area 1 has 16channels.
Scene setup: you can edit the "Remark", "Running time" and "Intensity".
Scene restore: you have two options – "Scene before power off" and "Specified scene". It
is the scene you want the Dimmer to recall when the Dimmer powered on. (see limitation
DMX Controller – User Manual
10
Advertisement
Table of Contents
