Reading Out The Event Memory Of The Cp-G; Resetting All Values Of The Generator Sub-Menu To The Default Values; Returning To The Main Menu; Resetting The Panel Language To The Default (English) - Fischer Panda xControl Series Manual

Panda xControl
Select the "Fuel Pump" or "Opt. DC Outputs" by using the
Fig. 2.5.3.3-1: Sub-menu: Switching Outputs
"Step-up"/"Step-down" keys and then confirm with the "Start/
Stop - Enter" key.
The "Back" item returns you to the "Generator" sub-menu.
The value of the output can be set to "0" for deactivated or
"1" for activated by using the "Step-up"/"Step-down" keys.
Confirm with the "Start/Stop - Enter" key.
2.5.3.4 Reading out the Event Log of the CP-G
The menu item is selected by using the "Step-up"/"Step-down" keys and confirmed with the "Start/Stop - Enter" key.
The respective menu item opens.
See "Table of Faults" on page 26. See "Description of the symbols" on page 27.
Fig. 2.5.3.4-1: Event Memory
QR Code
Error code
Event number
Error time
One can scroll through the event memory by using the "Step-
up"/"Step-down" keys and then return to the Generator menu
with the "Start/Stop - Enter" key.

2.5.3.5 Resetting all values of the Generator sub-menu to the default values

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter" key. The
respective menu item opens.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
Fig. 2.5.3.5-1: Resetting all values
"Step-down" keys and then confirmed with the "Start/Stop -
Enter" key.
2.5.3.6 Returning the Main Menu
The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter" key. The
respective menu item opens.

2.5.4 Resetting the panel language to the default (English)

1. Press and hold the "Step down" key with the panel switched off.
2. Switch on the panel and hold down the "Step down" key until the first overview screen is displayed.
3. The panel language has now been reset. All other settings are retained.
Page 24 - Chapter 2: Panda xControl 29.9.16