Setting The Display To Flash In The Event Of A Fault; Setting The Panel Heating; Setting The Display Of The Optional Measurement Data - Fischer Panda xControl Series Manual

Panda xControl
"Off" or "On" can be selected by using the "Step-up"/"Step-
Fig. 2.5.2.8-1: Sub-menu: Aural Alarm
down" keys and then confirmed with the "Start/Stop - Enter"
key.
The "Back" item returns you to the Panel sub-menu.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter" key.

2.5.2.9 Setting the display to flash in the event of a fault

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter" key. The
respective menu item opens.
"Off" or "Error" or "Warning and Error" can be selected by
Fig. 2.5.2.9-1: Sub-menu: Flashing when Faulty
using the "Step-up"/"Step-down" keys and then confirmed
with the "Start/Stop - Enter" key.
The "Back" item returns you to the Panel sub-menu.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter" key.

2.5.2.10 Setting the Panel Heating

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter" key. The
respective menu item opens.
"Off" or "On" can be selected by using the "Step-up"/"Step-
Fig. 2.5.2.10-1: Sub-menu: Panel Heating
down" keys and then confirmed with the "Start/Stop - Enter"
key.
The "Back" item returns you to the Panel sub-menu.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter" key.

2.5.2.11 Setting the display of the optional measurement data

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter" key. The
respective menu item opens.
Page 20 - Chapter 2: Panda xControl 29.9.16