The Menu; Main Menu - Fischer Panda xControl Series Manual

Panda xControl
3. Press "Start/Stop" button (switching off).
Fig. 2.4.4-1: Stopping
NOTE: Never switch off the main battery until the ATTENTION:
generator has stopped, shut the fuel valve if necessary!

2.5 The Menu

One can access the menu from the final overview page.
Fig. 2.5-1: Menu entry symbols
Switch on the CP-G and scroll down to "Enter Menu Page".
Press the Start/Stop - Enter key to enter the menu.

2.5.1 Main Menu

You can choose from the following sub-menus in the
Fig. 2.5.1-1: Main Menu
main menu:
1. "Panel" sub-menu - The display of the of the panel can be adapted in the "Panel" sub-menu (e.g. brightness,
language, etc.).
2. "Generator" sub-menu - All settings related to the generator can be made in the "Generator" sub-menu, e.g.
bleeding the fuel pump etc.
3. The "Service" sub-menu is blocked and can only be accessed by trained personnel and Fischer Panda
employees.
4. Back - back to the overview pages
Page 16 - Chapter 2: Panda xControl 29.9.16