Setting The Contrast Of The Cp-G; Setting The Standby Time Of The Cp-G; Setting The Standby Illumination Of The Cp-G; Setting The Display Mode Of The Cp-G Overview - Fischer Panda xControl Series Manual

Panda xControl
The value is changed by using the "Step-up"/"Step-down"
Fig. 2.5.2.1-1: Sub-menu: Illumination
keys and the setting is confirmed with the "Start/Stop - Enter"
key.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter" key.

2.5.2.2 Setting the contrast of the CP-G

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter" key. The
respective menu item opens.
The value is changed by using the "Step-up"/"Step-down"
Fig. 2.5.2.2-1: Sub-menu: Contrast
keys and the setting is confirmed with the "Start/Stop - Enter"
key.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter" key.

2.5.2.3 Setting the standby time of the CP-G

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter" key. The
respective menu item opens.
The value is changed by using the "Step-up"/"Step-down"
Fig. 2.5.2.3-1: Sub-menu: Standby Time
keys and the setting is confirmed with the "Start/Stop - Enter"
key.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter" key.

2.5.2.4 Setting the standby illumination of the CP-G

The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter" key. The
respective menu item opens.
The value is changed by using the "Step-up"/"Step-down"
Fig. 2.5.2.4-1: Sub-menu: Standby Illumination
keys and the setting is confirmed with the "Start/Stop - Enter"
key.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter" key.
2.5.2.5 Setting the display mode of the CP-G overview page
The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter" key. The
Page 18 - Chapter 2: Panda xControl 29.9.16