Table of Contents
Advertisement
2.1
System Setup
You can easily get TPC started by following the below steps.
1.
Unpack the TPC package. Check the packing list at the beginning of this manual
to make sure all items have been included.
2.
Open side cover and then Install a CFast card containing Embedded Windows 7
or another operating system.
Warning! It is suggested to turn OFF system power as you plug in or pull out the
memory card, even though the CompactFlash memory is hot swappa-
ble.
3.
Connect the power connector to the 24 V
either be of some power adapter or in-house power source.
4.
Plug the power lines into the system power receptor.
5.
Power on the system.
TPC-XX81WP User Manual
Figure 2.1 Install CFast Card
Figure 2.2 Pin Definition of Power Connector
Figure 2.3 Power Receptor
10
power lines. The power lines can
DC
Advertisement
Table of Contents
