Using The Lathe Spindle Lock - Teknatool nova ORION Series Operation Manual

Using the Lathe Spindle Lock

The NOVA Orion lathe features 24 spindle indexing position which can also be used as a lock spindle lock.
Engaging/Disengaging the Spindle Lock
Pull the spindle index pin out from the headstock and turn
it 180 degrees so the "Lock" text is closer to the HMI.
Slowly release the spindle index pin to let the spring pull the
index pin into the headstock.
Turn the lathe spindle by hand to ensure the spindle lock
has engaged properly.
➢ Note: Head of the index pin will be completely flat
against its housing when the spindle lock is
engaged properly.
Pull the spindle index pin out from the headstock and turn
it 180 degrees so the "Unlock" text is closer to the HM to
disengage the spindle lock.
➢ Note: Head of the index pin should be held up by
the tension pin of the index pin housing.
24
128-1019-004
Locked Position
Unlocked Position