Teknatool nova ORION Series Operation Manual page 20

After pressing one of the <F> key to change the lathe speed,
the lathe screen will change a screen where it asks for
conformation to change the lathe set speed.
Press<F/R> key to confirm and change the lathe to the speed
allocated to the favourite speed.
Press <Menu> key to cancel setting the speed from favourite
speed and return to the home screen.
Editing the Favourite Speed Function
Press the <Menu> key while on the lathe home screen
to access the main menu of the lathe.
Navigate down the "Edit Fav Speed #1" item on the
menu.
Press in the speed control knob to enter the
function.
Use the speed control knob to navigate down to the
favourite speed to edit.
➢
Note:
There are 2 pages to this screen. The pages
will automatically switch when scrolled down.
Press the speed control knob when the cursor is next
to the favourite speed to edit.
20
128-1019-004