Password Lock - Teknatool nova ORION Series Operation Manual

Password Lock

Setting the password
• Enter the lathe menu and navigate down to "Set
Password" on the second page.
• Press the speed dial when the cursor is in line
with the "Set Password" text.
• The screen will change to a screen to enter the
new password for the lathe.
• Set the new password by using the keys
<F1>~<F4>. The F keys will correspond to each
digit of the password.
• i.e. <F1> key will correspond to the first
digit (far left)
• Press <ON> once the new password is set
to save the new password.
Locking the lathe
The lathe can be locked immediately from the
"Lock Lathe Now" function. The lathe will
immediately switch to the lock screen when
entering this function.
➢
Note: The lathe will enter the lock screen when
entering "Password lock" function in the main
menu when "Protect Menus" option is turned
ON.
Unlocking lathe using the password
The lathe can be unlocked by entering the password using
the keys <F1>~<F4>. The F keys will correspond to each
digit of the password (i.e. <F1> key will correspond to the
first digit far left)
Press <ON> once the password has been entered to unlock
the lathe.
29
128-1019-004