Table of Contents
Advertisement
5. Customize F Keys
6. Lathe Settings
7. Wireless remote
8. Motor Parameters
9. Password Lock
10. Firmware Upgrade
11. Version Info
Each function in the menu will be described in detail in the later section of this manual.
Favourite Speed Function
Favourite speed function allocates pre-set speed to each of the function keys (<F> keys) so the most commonly used lathe
speeds can be accessed without using speed dial knob.
A total of 2 speeds can be set to a single <F> key (i.e. A total of 8 speeds can be set to the favourite speed function).
Setting Favourite Speed Function
➢ Note: The <F> keys must be set to use the favourite speed function to
have access to all assigned speeds. Refer to
alternative functions that can be assigned to the <F> keys.
While on the home screen, press one of the <F> keys where
the desired speed is assigned to.
Press the <F> key once to access the first assigned speed
Press the <F> key again to switch between the first assigned
speed and the second assigned speed.
The default speeds for the favourite speed function are the
following:
Favourite speed
Allocated
Keys
F1
#2D (Default)
F2
F3
F4
Default Allocated
Number
#1
#3
#4
#5
#6
#7
#8
Speed
250
500
750
1020
1250
1500
1750
2000
19
128-1019-004
page27
to check the
Advertisement
Table of Contents
