Troubleshooting - Paslode COILMASTER IM50S Manual

TROUBLESHOOTING

FIRING THE TOOL
Tool Working Correctly
PROBLEM: No fan and
does not fire
PROBLEM:
Fan runs but tool
does not fire
PROBLEM:
Fan runs, tool fires,
no nail fed.
SOLUTION:
• Check for flat battery
• Remove and reinsert battery to reset tool
SOLUTION:
• Check for empty fuel cell, flat battery, clogged filter or dirty spark plug
• Clean and oil tool
• Check driver blade returned to top of cylinder
SOLUTION:
• Check for jammed nail
• Clean and lubricate feed piston (5,000 shots)
• Drip Impulse oil into hole and on piston feed shaft.
ALWAYS REMOVE
BATTERY, FUEL CELL
AND FASTENERS
WHEN SERVICING
OR CLEARING A JAM.
IM50S COILMASTER MANUAL 10