Troubleshooting; Cleaning And Return Of System - ZOLL CMCT Monitoring System Instructions For Use Manual

6

TROUBLESHOOTING

The following table lists the recommended actions for potential issues with the CMCT
System. Please call ZOLL at +972-9-9603900 if you need assistance with any of these
instructions
.
Signs
Sensor light indicator The Sensor does not sit
is not on while sitting properly in the Charger.
in the Charger for
The Charger is not connected
charging.
to the power outlet.
Sensor light turns Sensor Error.
blinking amber after
being applied on the
patient's body.
Charger light indicator The Charger is not connected
is not on. to the power outlet.
The Gateway screen The Gateway does not sit
does not indicate the properly in the Charger.
Gateway is being
charged while sitting
in the Charger for
charging.

7 CLEANING AND RETURN OF SYSTEM

Users are not required to clean the CMCT System. When the monitoring period is over, use
the box provided in the original packaging to return the CMCT System (Sensor, Charger,
Gateway, power cable, and any unused Patches) to ZOLL.
CMCT Monitoring System
Instructions for Use
Possible Causes
Remove the Sensor from the Charger and
reinsert back to the Charger.
Plug in the Charger to the power outlet using
the power cable provided in the CMCT
packaging. When properly connected, the
light indicator on the Charger should be on
and is green.
Contact ZOLL customer service
Plug in the Charger to the power outlet using
the power cable provided in the CMCT
packaging. When properly connected, the
light indicator on the Charger should be on
and is green.
Remove the Gateway from the Charger and
reinsert back to the Charger.
Actions
1.888.592.3798.
at
Page 20 of 31