Part 4: Troubleshooting - ZOLL Arrhythmia Management System Instruction Manual

Table of Contents

Advertisement

Actions for Potential Issues
The following table lists the recommended actions for potential issues with AMS. Call ZOLL if you need
assistance with any of these instructions.
POTENTIAL ISSUES
Sensor light indicator is not on while
sitting in Charger for charging.
Sensor light is blinking orange
being applied on the body.
Charger blue light
is not on.
Gateway screen does not indicate
Gateway is being charged while sitting in
Charger for charging.
POSSIBLE CAUSES
Sensor is not sitting properly
in Charger.
Charger is not connected to a
standard power outlet.
after
Sensor Error.
Charger is not connected to a
standard power outlet.
Gateway is not sitting
properly in Charger.
Page 27

Part 4: Troubleshooting

ACTIONS
Remove Sensor from Charger and reinsert into
Charger.
Plug Charger into a standard power outlet using the
Power Cord provided in the AMS packaging. When
properly connected, the light indicator on the Charger
should be blue.
Call ZOLL at 1.888.592.3798.
Plug Charger into a standard power outlet using the
Power Cord provided in the AMS packaging. When
properly connected, the light indicator on the Charger
should be blue.
Remove Gateway from Charger and reinsert into
Charger.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcor

Table of Contents