Table of Contents
Advertisement
5 DIRECTIONS FOR USE
5.1 GETTING STARTED
5.1.1 LOCATE THE COMPONENTS OF THE CMCT SYSTEM:
1. Patch in Envelope
2. Sensor
3. Charger
4. Gateway
5. Power Cord (or AC Adapter)
6. Preparation Wipes
See Figure 7.
5.1.2 CHARGING THE SENSOR – FIRST USE AND EVERY 3 DAYS
IMPORTANT: Set up Charger in bedroom or room where you sleep. This allows device to send
data to ZOLL at least once a day.
1. Connect the Charger to a power outlet in your
bedroom. A Blue light on the Charger means the
Charger has power.
1.
Place the Sensor on the Charger. Wait for a solid green
light
to appear on the Sensor, this means it is fully
charged and ready for use. Once removed from the
Charger, the green light will disappear.
2. The Sensor, typically, takes about one hour to charge.
See Figure 8.
CMCT Monitoring System
Instructions for Use
Figure 8: Charging the
Sensor
Page 13 of 31
Advertisement
Table of Contents
Need help?
Do you have a question about the CMCT Monitoring System and is the answer not in the manual?
Questions and answers