Hitachi C 12LSH Handling Instructions Manual page 58

English
Max.
sawing
dimension
Miter sawing range
Bevel sawing range
Compound sawing range
Net weight
Cord
When cutting the workpiece which has the dimension of "*" there might be some possibility of
the lower end of the circular saw to touch with the workpiece, even if the motor head is located
at the lower limit position. Pay attention when cutting the workpiece. For further details, refer to
"PRACTICAL APPLICATIONS" on page 70. Mount the auxiliary board on the fence surface (Refer
( ) the thickness of auxiliary board). Refer to "5. Cutting large workpieces" on page 72 (Fig. 31).
Head
Compound Left 45°
Left 45°
Right 45° Right 45°
Right 45°
Left 0° – 46° Right 0° – 57°
Left 0° – 45° Right 0° – 45°
Left (Bevel) 0° – 45°, Left (Miter) 0° – 45°,
Right (Miter) 0° – 31°
Right (Bevel) 0° – 45°, Right (Miter) 0° – 45°,
Left (Miter) 0° – 31°
C12LSH 30 kg C12RSH 29 kg
2 Conductor type cable 1.8 m
Turntable
Left 45°
*
With aux. board
Right 31°
*
With aux. board
*
With aux. board
Left 31°
*
With aux. board
58
Max. sawing dimension
Max. Height 70 mm
Max. Width 220 mm
or
Max. Height 75 mm
Max. Width 180 mm
25 mm
Max. Height 70 mm
Max. Width 265 mm
or
Max. Height 75 mm
Max. Width 220 mm
25 mm
Max. Height 45 mm
Max. Width 220 mm
or
Max. Height 50 mm
Max. Width 180 mm
25 mm
Max. Height 45 mm
Max. Width 265 mm
or
Max. Height 50 mm
Max. Width 220 mm
25 mm