Restarting The Computer - Toshiba Satellite L635 Series User Manual

Starting Hibernation Mode
You can also enable Hibernation Mode by pressing FN + F4 - please refer
to Chapter 5,
To enter Hibernation Mode, follow the steps below.
1. Click Start.
2. Point to the arrow icon (
Automatic Hibernation Mode
The computer can be configured to enter Hibernation Mode automatically
when you press the power button or close the lid. In order to define these
settings, you can follow the steps as described below:
1. Click Start and click the Control Panel.
2. Click System and Security and click Power Options.
3. Click Choose what the power buttons do or Choose what closing
4. Enable the desired Hibernation Mode settings for When I press the
5. Click the Save changes button.
Data Save in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer will take a
moment to save the current data in memory to the hard disk drive.
After you turn off the computer, and the content of memory has been saved
to the hard disk drive, turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.

Restarting The Computer

Certain conditions require that you reset the computer, for example, if:
■
You change certain computer settings.
■
An error occurs and the computer does not respond to your keyboard
commands.
If you need to restart the computer, there are three ways this can be
achieved:
■
Click Start, point to the arrow icon(
Restart from the menu.
■
Press CTRL, ALT and DEL simultaneously (once) to display the menu
window, then select Restart from the Shut down options.
User's Manual
The Keyboard, for further details.
from the menu.
the lid does.
power button and When I close the lid.
Getting Started
) and then select Hibernate
) and then select
1-11