Internal Modem Guide
This appendix describes how to install and the remove the internal modem.
CAUTIONS: 1. Do not remove the base cover except to remove or
2. Do not disassemble the computer beyond the steps
3. Always remove the Battery Pack and disconnect the AC
4. Be careful not to drop any screws or other foreign
Installing the internal modem
NOTE: The internal modem is preinstalled. The following is for informa-
tion only.
To install the internal modem follow the procedures below.
Removing the battery pack
Before installing the internal modem, remove the battery pack. Refer to Chapter 6 for
details on removing the battery pack.
Installing the modem board
To install the modem board, follow the steps below.
1. Turn the computer upside down.
2. Remove two screws securing the modem socket cover.
3. Lift off the modem socket cover.
install the internal modem or to check the PTT label.
described in this instruction or touch any components
not specifically described.
Adaptor before removing the base cover.
matter into the computer. Metal or other foreign matter
can damage the computer.
Appendix G
G-1