Fit & Usage; How To Put The Helmet On; Proper Fit - BRP Ski-Doo OXYGEN User Manual

C. FIT & USAGE

1. HOW TO PUT THE HELMET ON

1. 1. 1. 1. Make sure the sun visor is retracted into the helmet shell.
2. 2. 2. 2. Move the neck protector outward to clear the opening.
3. 3. 3. 3. Open the chinstrap and chinstrap comfort pad.
4. 4. 4. 4. Pull apart the lower ends of the chinstrap.
5. 5. 5. 5. It will now be easy to put the helmet on.
6. 6. 6. 6. Make sure your ears are inside the earmuffs.
7. 7. 7. 7. Close and fasten the chinstrap.
8. 8. 8. 8. Make sure the chinstrap passes under the chin and fits snugly.
9. 9. 9. 9. Check that the chin section is securely locked by pressing it up from below.

2. PROPER FIT

WARNING WARNING
WARNING WARNING
Wearing the wrong helmet size can increase the risk of serious injury or death
in an accident. A helmet that is too large for your head may be dislodged or
knocked off in an accident.
To select the right helmet size for your head, follow the steps:
1. TRY ON THE HELMET
Grasp both chin straps to pull the helmet completely onto your head, ensuring
that the top of your head is in contact with the top of the helmet interior. Try
the helmet with all the protection you plan to use (balaclava, neck tube, face
mask, etc.)
2. CHECK FOR A PROPER FIT
To make sure that your helmet is the right size, check that:
• The helmet inner lining fits snugly around your head.
• The top pad presses firmly on your head.
• The cheek pads contact your cheeks.
• There is no space around your brow under the inner lining. Test this by trying
to insert your fingers. If the helmet does not fit snugly, try on a smaller size.
• Adjust the earmuffs position to fit on your head, around your ears, not on
your ears.
This step might take several trials before finding the perfect adjustment.
17