Ventilation System; Fit & Usage; How To Put The Helmet On - BRP EXOME User Manual

B. THE HELMET

11. VENTILATION SYSTEM

The EXOME helmet has a two-way adjustable ventilation system. As
needed, you can modulate the air flow as per three distinct configurations:
1. The front vent is adjustable in 3 positions. When the sliding button is in
the highest position, the vent is closed. When the sliding button is lowered,
it switches to partially open and then fully open.
2. The upper extractors are adjustable in 2 positions. They are either fully
closed or fully open. For the winter model, when the sliding button is in the
front position it corresponds to the fully open mode and when the sliding
button is in the rear position it corresponds to the fully closed mode. For
the summer model, it is the opposite.
Winter model
Summer model
In all three cases, it allows you to increase or reduce the air flow to reach
the desired level of comfort.
Note that the snowmobile speed, the windshield, or the head rotation can
affect the air flow inside the helmet.
C. FIT & USAGE

1. HOW TO PUT THE HELMET ON

1. Make sure the sun visor is retracted into the helmet shell.
2. Move the neck protector outward to clear the opening.
3. Turn the helmet jaw to the open position.
4. Open the breath ventilation system.
5. Open the chinstrap and chinstrap comfort pad.
6. Pull apart the lower ends of the chinstrap.
7. It will now be easy to put the helmet on.
8. Close and fasten the chinstrap.
9. Make sure the chinstrap passes under the chin and fits snugly.
10. Check that the helmet jaw is securely locked by pushing it up from
below.
15