Troubleshooting Guide - BRP Ski-Doo OXYGEN User Manual

G. TROUBLESHOOTING GUIDE
PROBLEM ACTION
1. In unusual circumstances, a haze may appear on the surface of the anti-fog coating.
This can be easily removed and never reappear by following these steps:
a. Moisten a soft cloth with warm soapy water.
THE HEATING VISOR b. Gently clean and let air dry.
SEEMS HAZY c. Let air dry without trying to rub dry.
d. Repeat if necessary.
2. If the problem is still not resolved, check if the fog seems to be between the two lenses.
1. Check if the sun visor is installed and positioned correctly on the helmet.
SUN VISOR 2. Check if there are any broken parts.
DYSFUNCTIONING
3. If the problem is still not resolved, go to your authorized BRP dealer for detailed inspection.
Make sure your face shield is properly closed.
ICE FORMATION ON FACE
SHIELD LATCH
2. Make sure you use the breath deflector to reduce water accumulation in this area.
1. Check if the rear light has been damaged.
REAR LIGHT
DYSFUNCTIONING
2. If the problem is still not resolved, go to your authorized BRP dealer for detailed inspection.
1. Make sure you press the ON button longer than 1 second. To avoid any misuse, there is a 1 second delay before your front
light turns ON.
FRONT LIGHT 2. Check if the batteries are still good.
DYSFUNCTIONING
(SOLD SEPARATELY) 3. Check if the electrical contacts in the batteries socket are damaged or dirty;
4. If the problem is still not resolved, go to your authorized BRP dealer for detailed inspection.
If this is the case, go to your authorized BRP dealer for detailed inspection.
Replace them by new ones if necessary.
You should hear/feel a "click".
Replace it if necessary.
Replace the batteries by new ones if necessary
Clean the electrical contacts or replace your front light if necessary.
26