Table of Contents
Advertisement
TRANSPORT
The machine must be fixed to a pallet to make it easier to transport and more secure.
At the reception of the machine, check that the packaging is in good condition –in case of damage, report to the forwarder.
PAY PARTICULAR ATTENTION WHILE TRANSPORTING THE MACHINE AT TEMPERATURES BELOW 0°C TO PREVENT THE WATER INSIDE THE TANKS AND
THE PIPES FROM BECOMING FROZEN.
DRAIN THE TANKS, REMOVE THE SCREEN OF THE CLEAN SOLUTION FILTER AND LET THE WATER FLOW AWAY COMPLETELY OUT OF THE PIPES.
TRANSPORT- HANDLING
When the machine is moved from one place to another you are advised to:
• Not load it on the vehicle with a forklift truck in order not to damage it;
• Fix it well to the vehicle using belts and/or ropes and chains.
Four handles were positioned on two sides of the machine: there are two removable handles on the back side (A) and two
shaped like slots positioned on the front side on the clean water tank (B). These handles make it easier to lift the machine
(i.e. it weighs 95 kg) and load it onto a transportation means or move it to where it will be used.
To transport the machine manually, proceed as follows:
push down the handles until the back wheel rests on the floor; that way, the brushes will be lifted from the ground and
consequently the machine can be moved.
MIRAGE Reinigungstechnik
Alt Roggentiner Weg 11, D- 18196 Dummerstorf
TRANSPORTING THE MACHINE
A
9
Telefon: 038208 82560 Fax: 038208 82561 Mobil: 0172 38033
B
www.mirage-reinigungstechnik.de
Advertisement
Table of Contents
