Before washing the escalator, the machine can perform a pre-wash treatment using a specific detergent for tough dirt. This can be particularly
useful to remove grease used to lubricate the escalators gears that can transfer to the steps during operation of the escalator.
Carry out pre-washing, as follows:
• Set the selector to "OPEN GUN";
• Connect the accessory spiral hose to the quick connector (A) and connect the accessory spray gun to the spiral hose;
• Connect the chemical pick-up hose to the quick connector (B) and then insert the other end of the hose into the detergent container;
• Open the spray gun tap and activate the pump;
• Regulate the detergent delivery pressure by setting it between 0.5 and 0.8 bar;
• Spray the product on the escalator steps by using the spray gun (C), making sure that the escalator has a complete rotation cycle.
A
A
B
B
MIRAGE Reinigungstechnik
Alt Roggentiner Weg 11, D- 18196 Dummerstorf
PREWASHING THE STEPS WITH THE WAND
(optional for the BASE version)
C
C
15
Telefon: 038208 82560 Fax: 038208 82561 Mobil: 0172 38033
www.mirage-reinigungstechnik.de