Maintenance; Fitting The Brushes; Cleaning Brushes In The Tray - Mirage EC52 User Manual

Escalator cleaner
Table of Contents

Advertisement

INTRODUCTION
REGULAR AND PERIODIC SERVICING OF YOUR ESCALATOR CLEANER GUARANTEES OUTSTANDING PERFORMANCE OF THE MACHINE AND ITS LONG
LIFE. THE PAGES THAT FOLLOW CONTAIN THE INFORMATION THAT WILL HELP TO PLAN THE CARE AND THE SERVICING THAT THE ESCALATOR CLEA-
NER NEEDS.
WARNING!
DO NOT CARRY OUT ANY MAINTENANCE OPERATION NEITHER ON THE MACHINE NOR ON ITS COMPONENTS WITHOUT HAVING FIRST STOPPED THE
MACHINE, PUT IT ON A FLAT FLOOR AND DISCONNECTED THE STARTING BATTERY CONNECTOR.
ANY OTHER TYPE OF SERVICE OPERATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL OR AUTHORISED SERVICE CENTRES ONLY .
WARNING!
DO NOT TAMPER WITH ANY SAFETY-RELATED PART.
THESE CAN BE REMOVED ONLY AS PART OF THE MAINTENANCE OF AN AUTHORISED SERVICE CENTRE.
To assemble the brushes (both types), proceed as follows:
Unscrew the 3 screws by using the wrench and remove the side panel;
Insert the brushes and pay attention to insert the hex slot into the hex motor pins;
Reposition the moveable plate by inserting the pins into the cylindrical slots of the brushes;
Close the plate by using the 3 screws.
Use the stainless steel tray accessory (1) to clean the brushes. Proceed as follows:
Lift the machine onto its stand;
Place the stainless steel tray accessory (1) under the head brush;
Pour a mixture of water and detergent (max 2 cm) for the washing of the brushes into the tray;
Lower the machine from its stand and let the brush head rest into the tray;
Open the machine's right side panel
Inside the machine, connect the flexible hose A to mouthpiece 2. In this way, all the dirt will be vacuu-
med into the recovery tank;
Fill the solution tank with clean water;
Move the valve selector to "OPEN VAPOR";
Turn on the vacuum and then turn on the brushes;
Open the tap and activate the pump switch;
Regulate the delivery pressure of clean water to obtain the correct flow.
1
MIRAGE Reinigungstechnik
Alt Roggentiner Weg 11, D- 18196 Dummerstorf

MAINTENANCE

FITTING THE BRUSHES

CLEANING BRUSHES IN THE TRAY

21
www.mirage-reinigungstechnik.de
Telefon: 038208 82560 Fax: 038208 82561 Mobil: 0172 38033

Advertisement

Table of Contents
loading

Table of Contents