Table of Contents
Advertisement
To fit the PPL brushes, position yourself behind the machine:
•
Press the handle downwards (1) and let the stand (2) lower down.
•
Remove the side panel and the Tynex brushes and insert the PPL brushes. Pay attention to the different shapes of the locking pins.
•
Close the side panel by inserting the cylindrical hollow side of the brushes into the proper pins. Fix the side panel by using the screws (3).
Use the two centring pins to position the side panel properly.
1
For preparing the machine to wash the escalator, proceed as follows:
•
Remove the side panel by using the hook;
•
Inside the machine, connect the hose A to mouthpiece 2. In this way, all dirt will be vacuumed into the recovery tank;
•
Fill the solution tank with a mixture of water and the universal degreasing detergent for cleaning escalators (A);
Move the valve selector to "OPEN VAPOR".
•
MIRAGE Reinigungstechnik
Alt Roggentiner Weg 11, D- 18196 Dummerstorf
WET PHASE SET UP
Fitting the PPL brushes
2
CONNECTING THE HOSES AND FILLING THE SOLUTION TANK
3
16
Telefon: 038208 82560 Fax: 038208 82561 Mobil: 0172 38033
A
www.mirage-reinigungstechnik.de
Advertisement
Table of Contents
