Mirage EC52 User Manual page 6

The machine must be cleaned by persons who have received proper instruction for the purpose, who know how to cut off the sources of energy
and who know the characteristics of the machine so as not to find themselves in a hazardous situation.
Clean the machine coverings, the panels and commands with cloths soaked in water or a detergent solution.
Solvents such as petrol, alcohol, etc. must not be used.
Call in specialised personnel to clean the electrical components. Said personnel should use products that are not corrosive and are anyway
suitable for electrical circuits.
Specialised personnel with thorough knowledge of the machine and its components must be called in to carry out maintenance operations.
Any maintenance and cleaning operation must be carried out with the power cable disconnected from the power mains, with all the mecha-
nisms still, after the hot sections have cooled down.
When using compressed air guns for cleaning, protect the eyes and ears.
STORING THE MACHINE
If the machine is not used for a long period, it is essential to:
• Disconnect the power cable from the power mains;
• Empty and wash the tanks as described in the relative section;
• Clean the clean water filter and empty it completely;
• Clean the machine inside and outside;
• Keep brushes and squeegee raised;
• Keep the machine in a protected place;
• Keep the machine within a temperature range of 5°C / 40 °C;
• Keep the machine within a humidity range of 30 % / 80 %.
PRECAUTIONS FOR THE SAFETY OF OPERATORS AND TECHNICIANS
• The machine must not be used by non-authorised personnel who have not been trained to use it properly or by people who are under
• the influence of substances that could alter their nervous reflexes (alcohol, psycho pharmaceuticals, drugs etc.);
• Do not use the machine in inflammable areas or where there is the danger of explosions;
• Do not collect material that is alight or anything else that could cause a fire;
• Do not remove protections or guards when the machine is in operation;
• Do not use the machine to clean objects;
• Do not start to perform maintenance operations with parts in movement;
• Protect eyes and ears when using compressed air or water guns for cleaning the machine;
• To raise the machine make use of devices that are adequate to bare the weight of the machine itself;
• Do not cause flames or sparks around the machine;
• Move carefully over uneven or crumbling paving and on slopes;
• Slow down on slopes and slippy surfaces;
• Make sure the machine is not exposed to rain and weather conditions, whether in motion or still;
• Temperature of usage of the machine has to be kept within + 5 °C / + 40 °C;
• Humidity has to be kept within 30 % / 80 %.
MIRAGE Reinigungstechnik
Alt Roggentiner Weg 11, D- 18196 Dummerstorf
CLEANING AND MAINTENANCE
7
www.mirage-reinigungstechnik.de
Telefon: 038208 82560 Fax: 038208 82561 Mobil: 0172 38033