Elitegroup Computer Systems P6VXM2T Manual page 36

Pin Signal Name
1 Active LINE Out ( R )
3 GND (aLO)
5 GND (+12)
7 +12V (1A)
9 MIC
11 Front LINE Out ( R )
13 Front LINE Out ( L )
15 GND (fLO)
J2: External SMI
This header allows the user to install auxiliary front-oriented
microphone and line-out ports for easier access.
Pin Signal Name
1 SMI
2 GMD
USB2: USB port 3, 4 connector
The mainboard has two USB ports installed on the rear edge
I/O port array. Additionally, some computer cases have USB
ports at the front of the case. If you have this kind of case, use
auxiliary USB connectors USB2 to connect the front-mounted
ports to the mainboard.
Pin Signal Name
1 USBVCC
3 -DATA1
5 +DATA1
7 Cut away
9 GROUND
SIR1: Serial infrared port
The mainboard supports a Serial Infrared (SIR) data port. In-
frared ports allow the wireless exchange of information
between your computer a nd similarly equipped devices such
as printers, laptops, Personal Digital Assistants (PDAs), and
other computers.
Pin Signal Name
2 Active LINE Out ( L )
4 GND (aLO)
6 GND (+12)
8 Cut away
10 GND (MIC)
12 LINE Next ( R )
14 LINE Next ( L )
16 Cut away
Pin Signal Name
2 GROUND
4 Cut away
6 +DATA3
8 -DATA3
10 USBVCC
30