Table of Contents
Advertisement
Wireless communication indicator
The wireless communication indicator indicates the status of the wireless
communication functions.
Indicator status
Indicator off
Indicator glows
If you used the Task Bar to disable W LAN, restart the computer or follow
the procedures below to enable the system to recognize W LAN. Open or
click the following: start, Control Panel, System, Hardware Device
Manager, Network adaptors, Atheros AR5001X+ Wireless Network
Adaptor and enable.
NOTE: Indication of Wireless Communication Standards (Wireless LAN
and Bluetooth) The indication of Wireless LAN and Bluetooth is described
on the sticker affixed to the computer. The sticker can be seen by
removing a battery pack from the computer.
LAN
The computer has built in support for Ethernet LAN (10 megabits per
second, 10BASE T) and Fast Ethernet LAN (100 megabits per second,
100BASE Tx). This section describes how to connect/disconnect to a
LAN.
Do not install or remove an optional memory module while Wake up on
LAN is enabled.
Wake up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.
Portégé M200
Indication
Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction.
Wireless communication switch is on.
Wireless LAN or Bluetooth is turned on by an
application.
Operating Basics
4 19
Advertisement
Table of Contents
