Chapter 6 Power And Power Up Modes; Power Conditions - Toshiba Portégé M200 User Manual

Portégé M200
Power and Power-Up Modes
The computer's power resources include the AC adaptor and internal
batteries. This chapter gives details on making the most effective use of
these resources including charging and changing batteries, tips for saving
battery power, and power up modes.

Power conditions

The computer's operating capability and battery charge status are
affected by the power conditions: whether an AC adaptor is connected,
whether a battery is installed and what the charge level is for the battery.
AC adaptor Battery fully
connected charged
Battery partially
charged or no
charge
No battery installed
AC adaptor Battery charge is
not above low battery
connected trigger point
Battery charge is
below low battery
trigger point
Battery charge is
exhausted
No battery installed
User's Manual
Portégé M200
Chapter 6
Power on
Operates
LED: Battery green
DC IN green
Operates
Quick Charge
LED: Battery orange
DC IN green
Operates
No charge
LED: Battery off
DC IN green
Operates
LED: Battery off
DC IN off
Operates
LED: Battery flashes
orange
DC IN off
Computer goes into resume
mode and shuts down
Cannot operate
LED: Battery off
DC IN off
Power and Power Up Modes
Power off (no operation)
LED: Battery green
DC IN green
Quick charge
LED: Battery orange
DC IN green
No charge
LED: Battery off
DC IN green
—
—
—
—
6-1
6 1