Working Environment - Toshiba Portégé M200 User Manual

CE compliance
This product and the original options are designed to observe the related
EMC (Electromagnetic compatibility) and safety standards. However,
TOSHIBA should not guarantee that this product still observes these EMC
standards if options or cables not produced by TOSHIBA are connected
or implemented. In this case the persons who have connected/
implemented those options / cables have to assure that the system (PC
plus options / cables) still fulfils the required standards. To avoid in
general EMC problems following advice should be observed:
■
Only CE marked options should be connected / implemented
■
Only best shielded cables should be connected

Working environment

This product was designed to fulfil the EMC (electromagnetic
compatibility) requirements to be observed for so called "Residential,
commercial and light industry environments".
TOSHIBA do not approve the use of this product in working environments
other than the above mentioned "Residential, commercial and light
industry environments".
For example, the following environments are not approved:
■
Industrial Environments (environments with a mains voltage >230V~)
■
Medical Environments
■
Automotive Environments
■
Aircraft Environments
If this product is supplied with a network port, please refer to the
paragraph "Network connection".
Any consequences resulting from the use of this product in working
environments that are not approved are not the responsibility of TOSHIBA
Europe GmbH.
The consequences of the use of this product in non approved working
environments may be:
■
Interference with other devices or machines in the near surrounding
area
■
Malfunction of, or data loss from, this product caused by disturbances
generated by other devices or machines in the near surrounding area
Therefore TOSHIBA strongly recommend that the electromagnetic
compatibility of this product should be suitably tested in all non approved
working environments before use. In the case of automobiles or aircraft,
the manufacturer or airline respectively should be asked for permission
before use of this product.
Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.
Portégé M200
User's Manual
vii