Table of Contents
Advertisement
Turning on the power
This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section Starting up for the
first time in this chapter.
1. If the external diskette drive is connected, make sure it is empty. If a
diskette is in the drive, press the eject button and remove the diskette.
2. Open the display panel.
3. Slide the power button lock toward the up of the computer to unlock
the button, then slide the button toward the right.
Starting up for the first time
When you first turn on the power, the computer's initial screen is the
Microsoft Windows XP Tablet PC Edition Startup Screen Logo. Follow the
on screen directions for each screen. During setup, you can click the
Back button to return to the previous screen.
Be sure to read the Windows End User License Agreement display
carefully.
You cannot use the Tablet PC Pen when Windows is in Setup. Use
keyboard or touch pad while Windows is setting up.
Be sure to read the License Agreement carefully.
Portégé M200
POWER BUTTON LOCK
Turning on the power
POWER BUTTON
Getting Started
3 9
Advertisement
Table of Contents
